Something in the world of floating have you stumped?
Show Highlights
In this short, salty, and to the point episode, Graham and Ashkahn talk about installing float tanks on the second floor and how to work with contractors and engineers to determine if you need to reinforce your building to support the weight.
While you usually don’t need reinforcement, it’s always good to check. Listen in above or check out the transcript below and, as always, be sure to send us your questions. All questions welcome, from basic industry questions to well crafted stumpers. If Graham and Ashkahn don’t know the answer, they still relish the journey of discovery and educated guessing.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: We’ve got a question today about being on the second floor of a building with your float center. So, if you’re thinking about putting a float center on the second floor, do you need to do any structural reinforcement to hold the weight of the float tank?
Graham: Let me just say definitively that, it totally depends.
Ashkahn: Yeah, that I think is a very concrete answer.
Graham: Of course, it’s going to depend on the building, how new your construction is, whether you’re in a big multi-story concrete kind of building or whether you’re in an old wooden Victorian house. There’s a lot that goes into it, but shockingly, the overall answer in almost all of those cases tends to be no. You don’t really need to do any extra reinforcement.
Ashkahn: Yeah, most times people bring in a structural engineer to take a look at things and examine it. Often landlords will even require you to do that.
Graham: Which you totally should do, don’t just listen to us and be like, “Oh it’s totally fine,” and go forward with it — a structural engineer is a great thing to bring in.
Ashkahn: It usually ends up being that while the float tank is heavy and all the salt water is heavy and all that, it’s just got such a big footprint. The float tanks are so big that the actual amount of pounds per square foot that’s really being put on, is not really as much as one might think. So it tends to be that a lot of buildings can hold it, even the way they are. Especially newer construction, like newer condo type buildings with strong reinforced concrete and stuff like that, tend to not really be much of a concern.
Graham: Again, surprisingly even for older buildings. Often times those are also good to go. Another good reason to consult an expert before spending a lot of money on reinforcements you might not necessarily need.
Ashkahn: Yeah, it’s always weird and there’s always weird stuff out there. I mean, even The Float Shoppe across the river from us, they’re in an old Victorian house and they brought a structural engineer in to check things out before they started and they found they could put float tanks on the second floor but their first floor was not actually strong enough to put float tanks on. Which is really crazy.
Graham: Yeah, so again, consult the experts and if it doesn’t work out, then you always can reinforce anyway.
Ashkahn: Boom.
Graham: Shakalaka.
Recent Podcast Episodes
Tips for filling an empty service schedule – DSP 90
There are fewer things more stress inducing for a float center than seeing their schedule for the week and having it just be completely empty (Maybe watching your pump start up and spray water over your entire float room, but it’s a close call). What do you do in that situation? And how do you prevent it from happening in the future?
Well, Graham and Ashkahn have tried everything, from doing shout outs and deals on social media, to literally walking down the street trying to convince people to come in and float while the tanks were empty. Some tactics are more effective than others, but what it really comes down, at least in Float On’s case, is being prepared to give out a ton of free floats.
The guys talk about the effectiveness of each strategy they’ve tried and how they’ve reached out to contacts to form mutually beneficial business relationships and really get the ball rolling with filling up their tanks.
pH testing devices for float tank solution – DSP 89
There are lots of things you can measure when testing the quality of your water, for sanitation and comfort. Many of which aren’t specifically designed for float tanks. This is kind of an open secret in the industry, but most things simply aren’t accurate because of the incredibly high salinity of float tank solution. And pH seems to be one of them. This can cause float center owners major headaches as it’s often one of the first things that health departments/regulators will want to measure when they come and inspect your place (if they do at all).
Graham and Ashkahn try to break down this mystery of float water and try to break down some theories as to why it might be that float tank water might not have accurate pH readings, regardless of how you measure it.
Handling humidity to reduce water drops on tank ceilings – DSP 88
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
The purpose of a flow meters and the flow rate for a float tank – DSP 87
When navigating demands from health departments, it can be an absolute minefield of regulation, oftentimes with holdovers from the pool and spa industries. Many of these can be superfluous to float centers, but if you’re just starting a center, it’s difficult to know which ones to ignore, and which ones to incorporate.
Flow meters fall into this weird gray area where they’re not as important for float centers as for pools (and in some cases aren’t really needed at all), but can still be required by health departments or regulators. And to not throw the baby out with the salty bathwater, there are definitely some very practical uses for flow meters on float tanks.
Graham and Ashkahn tackle all these confusing elements and even provide specific product recommendations for flow meters for float tanks. Give it a listen!
When to contact health department – DSP 86
Contacting your health department/inspector/regulator/enforcer/supreme overlord can be stressful, to say the least. And given their general lack of understanding of floating as an industry, it makes sense why float centers may put this off. However, they have the authority to shut down your business if they feel that it’s a public safety issue, and that’s a situation no one should put themselves in.
Talking to your health department early and often can save yourself some headaches, but you don’t want to go to them unprepared. There’s a lot of nuance to regulation and existing codes that you should probably be familiar with beforehand. Fortunately, it may be something other float centers in your area have had to deal with, if there are any.
Ashkahn and Graham have a few tips for what to do to prepare and how to address common concerns they may have in this episode.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
