Something in the world of floating have you stumped?
Show Highlights
In this short, salty, and to the point episode, Graham and Ashkahn talk about installing float tanks on the second floor and how to work with contractors and engineers to determine if you need to reinforce your building to support the weight.
While you usually don’t need reinforcement, it’s always good to check. Listen in above or check out the transcript below and, as always, be sure to send us your questions. All questions welcome, from basic industry questions to well crafted stumpers. If Graham and Ashkahn don’t know the answer, they still relish the journey of discovery and educated guessing.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: We’ve got a question today about being on the second floor of a building with your float center. So, if you’re thinking about putting a float center on the second floor, do you need to do any structural reinforcement to hold the weight of the float tank?
Graham: Let me just say definitively that, it totally depends.
Ashkahn: Yeah, that I think is a very concrete answer.
Graham: Of course, it’s going to depend on the building, how new your construction is, whether you’re in a big multi-story concrete kind of building or whether you’re in an old wooden Victorian house. There’s a lot that goes into it, but shockingly, the overall answer in almost all of those cases tends to be no. You don’t really need to do any extra reinforcement.
Ashkahn: Yeah, most times people bring in a structural engineer to take a look at things and examine it. Often landlords will even require you to do that.
Graham: Which you totally should do, don’t just listen to us and be like, “Oh it’s totally fine,” and go forward with it — a structural engineer is a great thing to bring in.
Ashkahn: It usually ends up being that while the float tank is heavy and all the salt water is heavy and all that, it’s just got such a big footprint. The float tanks are so big that the actual amount of pounds per square foot that’s really being put on, is not really as much as one might think. So it tends to be that a lot of buildings can hold it, even the way they are. Especially newer construction, like newer condo type buildings with strong reinforced concrete and stuff like that, tend to not really be much of a concern.
Graham: Again, surprisingly even for older buildings. Often times those are also good to go. Another good reason to consult an expert before spending a lot of money on reinforcements you might not necessarily need.
Ashkahn: Yeah, it’s always weird and there’s always weird stuff out there. I mean, even The Float Shoppe across the river from us, they’re in an old Victorian house and they brought a structural engineer in to check things out before they started and they found they could put float tanks on the second floor but their first floor was not actually strong enough to put float tanks on. Which is really crazy.
Graham: Yeah, so again, consult the experts and if it doesn’t work out, then you always can reinforce anyway.
Ashkahn: Boom.
Graham: Shakalaka.
Recent Podcast Episodes
Accessories to keep in a float room – DSP 15
What goes into a float room?
From the furniture and fixtures to the floors and float tanks themselves, it turns out a lot. Whatever the items, they need to withstand a constant barrage of salt and water.
In this episode, Ashkahn and Graham go over the myriad float materials and objects commonly found in a float room, why they’re useful, and why minimalism works well when it comes to float room design.
Tips for setting the right float tank temperature – DSP 14
When you’re in the business of slinging nothingness, it takes a lot of work to create the ideal float environment. The hardest factor to get right in the float tank is usually water temperature — preferences are bound to vary across your floaters due to a natural variance in each individual’s skin temperature. Perfection is super subjective from person to person, and it’s hard to adjust for that.
While you can’t always deliver a float in which the air and water temperature are perfect, you can adjust based on individual customer feedback while avoiding extreme temperature variation by closely monitoring your tank’s temperatures.
Join Graham and Ashkahn on their search for the holy grail of floating — the perfect temperature.
How much do float tanks cost? – DSP 12
How much does a float tank cost?
Short answer — roughly $18 – 43K.
The slightly longer answer — listen to today’s episode.
How many float centers are in the US – DSP 11
Some questions are hard to answer, but that doesn’t take away the fact that it’s fun to try to find answers anyway.
This week, Ashkahn and Graham tackle the question, “How many float centers are there in the USA?” While the amount is constantly changing, their attempt to pin down a number opens up a fun discussion about the recent growth of the float industry.
Thoughts on offering discounts for the holidays – DSP 10
There are so many holidays, conventional commercial reasons to run sales or discounts.
In this episode, Ashkahn & Graham talk about which holidays seem to do the best in terms of attracting floaters, and also discuss some Float On general philosophy about not offering too many discounts.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
