Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello everybody. I am Graham, once again holding down the fort here alone in the studio. I guess not alone, Jordan is also here, but he’s just not in front of the mic, he’s behind the mic. He’s actually making some really animated faces right now. What’s that? You’re giving every listener $10? That’s really generous of you. Just go to floattanksolutions.com/jordanowesmemoney.
Getting back to the actual episode, boy is there a question today. It’s a really long one, and it takes a little explanation too, at the very beginning. So, it’s a long question with a footnote. Let’s just go ahead with it.
“Hi”, first of all. Hello. “What do you encourage your tacos and taco supremes to do when someone wakes and starts showering in a time of limbo?”
First of all, instead of managers and regular level employees, we call them taco supremes and tacos, is the background there. Time of limbo, I assume he means that time after you die but before you’re actually in your assigned afterlife. So, when you’re actually in this beyond living and death state, or just maybe a transition between floats. Not exactly sure.
“By that, I mean five to ten minutes before the scheduled time to start playing the music.” Okay, so I guess it was time between floats. “I understand that short floats can be good, and I’ve found that, especially for the first time, a 50 minute float can be the norm, as people’s minds start wondering about the wake up music. Thinking they are done with their floats, I wish to start their pumps so that the water can filter and thus start getting the room ready for the next client. However, my concern is that they are showering for excessive salt in the face or they just wanted to check their phone and intend on hopping back in until they hear the music. Just trying to find the balance for myself and recommendations for staff between being efficient in the workspace while not being totally invasive to the person and their session”
That was a big one. Basically, it’s just coming down to someone gets out of their float early, before the scheduled wake up music to come on to actually end their float, what do you do? Do you turn on the music early? Do you assume they’re getting out and run the pump so that you can actually get the next person in, maybe with a little more time? What is the right ethical and moral answer? I’m not too divided, and I’m the only one here so that’s really all that matters. I would say just don’t turn on the music initially. Turn it on at the scheduled time. Don’t turn on the pump early. If they come out of the room and they say yes, I’m totally done with my float, I’m not going back in that room, for sure turn on the pump or anything else, assuming that it doesn’t interfere with anyone who’s still in the tanks. At Float On this is another level to this problem. Even if people get out early at our shop and we know that they’re out of the room, our rooms are still right next to other rooms that usually have other people floating in them, so we can’t really turn on our pump equipment anyway, just because it would pass right into the tanks next door.
So, in our case it’s not a bonus even if we know that they have come out, but again, the customer is paying money to come in, or even if it’s a free float, it’s a free full length float, whatever that means for you, an hour or an hour and a half. So, if someone is out and showering, especially if it’s just 10 minutes beforehand and you think that they’re getting out anyway, don’t assume anything. It’s way better to, yourself, just have to rush a little bit more during transitions or again, get the next customer in on time as opposed to early. Way better to do that than to anger a customer by assuming that they’re done with the float. If you weren’t actually done with the float but the pump turns on while you’re in the shower, just getting salt out of your eyes, I’d feel a little bit rushed or almost that my calming experience was being pushed on a little bit excessively from the outside.
In things like this, I think, especially as a business owner, it’s important to really think of the needs of the customer ahead of just your own, or even the customer who’s coming in next. In this case, again, don’t worry too much about whether they’re coming out early or not. Your reaction should just be the same, which is assume that they’re staying in there full time. Turn on the music once they’re actually out, or turn on the pump again if you are able to run it, once you know for sure they’re out of the room. That’s it. Good, I hope that was satisfying.
If you have your own short or lengthy questions to send our way, cruise on over to floattanksolutions.com/podcast and I’ll be joined back in the studio in just a couple days with my co-host Ashkahn. Have that to look forward to. All right everyone, have a good one out there. Talk to you tomorrow.
Recent Podcast Episodes
How to build a pre-opening mailing list – DSP 99
It’s difficult to overstate the usefulness of building a big mailing list when starting up your business. This isn’t unique to float centers, but we do have specific instances that make our cases unique in comparison to other industries. How soon is too soon to start collecting email addresses? Who should you be asking? Graham and Ashkahn drop some knowledge on the subject and doll out some useful tips and tricks as well.
How to handle membership credit cards that fail – DSP 98
Many float center memberships provide a discount on floats that’s contingent on an agreement of a membership fee that has a contract that extends for a certain period of time, usually at least 3 months. What do you do if after the first month, the members credit card is declined? Graham and Ashkahn meander through this concept, while discussing some of the differences of memberships that many float centers offer.
What type of hydrometer to use for float solution – DSP 97
If you don’t know the specific gravity of your float tank solution, it makes it really difficult to make sure you’re providing an accurate float experience to every customer. Hydrometers are tools built specifically for this, but not all hydrometers are created equal. What types of hydrometers should you use and what do you need to look out for? Fortunately, Graham and Ashkahn have a lot of experience shopping for hydrometers (they break fairly easily, unfortunately) and are more than happy to share what they look for in these little measuring devices that help us make the magic happen.
Using client waivers for your float business – DSP 96
Lots of float centers have waivers. Protecting from liability in case of accidents is a straight forward and sensible thing, especially with a lesser known alternative wellness treatment. Float On doesn’t currently have waivers, and Graham and Ashkahn go into explaining their reasoning behind making that decision. They also explain the common sense justifications for deciding to have waivers as well.
What type of thermometer to use in a float tank – DSP 95
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
