Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello everybody. I am Graham, once again holding down the fort here alone in the studio. I guess not alone, Jordan is also here, but he’s just not in front of the mic, he’s behind the mic. He’s actually making some really animated faces right now. What’s that? You’re giving every listener $10? That’s really generous of you. Just go to floattanksolutions.com/jordanowesmemoney.
Getting back to the actual episode, boy is there a question today. It’s a really long one, and it takes a little explanation too, at the very beginning. So, it’s a long question with a footnote. Let’s just go ahead with it.
“Hi”, first of all. Hello. “What do you encourage your tacos and taco supremes to do when someone wakes and starts showering in a time of limbo?”
First of all, instead of managers and regular level employees, we call them taco supremes and tacos, is the background there. Time of limbo, I assume he means that time after you die but before you’re actually in your assigned afterlife. So, when you’re actually in this beyond living and death state, or just maybe a transition between floats. Not exactly sure.
“By that, I mean five to ten minutes before the scheduled time to start playing the music.” Okay, so I guess it was time between floats. “I understand that short floats can be good, and I’ve found that, especially for the first time, a 50 minute float can be the norm, as people’s minds start wondering about the wake up music. Thinking they are done with their floats, I wish to start their pumps so that the water can filter and thus start getting the room ready for the next client. However, my concern is that they are showering for excessive salt in the face or they just wanted to check their phone and intend on hopping back in until they hear the music. Just trying to find the balance for myself and recommendations for staff between being efficient in the workspace while not being totally invasive to the person and their session”
That was a big one. Basically, it’s just coming down to someone gets out of their float early, before the scheduled wake up music to come on to actually end their float, what do you do? Do you turn on the music early? Do you assume they’re getting out and run the pump so that you can actually get the next person in, maybe with a little more time? What is the right ethical and moral answer? I’m not too divided, and I’m the only one here so that’s really all that matters. I would say just don’t turn on the music initially. Turn it on at the scheduled time. Don’t turn on the pump early. If they come out of the room and they say yes, I’m totally done with my float, I’m not going back in that room, for sure turn on the pump or anything else, assuming that it doesn’t interfere with anyone who’s still in the tanks. At Float On this is another level to this problem. Even if people get out early at our shop and we know that they’re out of the room, our rooms are still right next to other rooms that usually have other people floating in them, so we can’t really turn on our pump equipment anyway, just because it would pass right into the tanks next door.
So, in our case it’s not a bonus even if we know that they have come out, but again, the customer is paying money to come in, or even if it’s a free float, it’s a free full length float, whatever that means for you, an hour or an hour and a half. So, if someone is out and showering, especially if it’s just 10 minutes beforehand and you think that they’re getting out anyway, don’t assume anything. It’s way better to, yourself, just have to rush a little bit more during transitions or again, get the next customer in on time as opposed to early. Way better to do that than to anger a customer by assuming that they’re done with the float. If you weren’t actually done with the float but the pump turns on while you’re in the shower, just getting salt out of your eyes, I’d feel a little bit rushed or almost that my calming experience was being pushed on a little bit excessively from the outside.
In things like this, I think, especially as a business owner, it’s important to really think of the needs of the customer ahead of just your own, or even the customer who’s coming in next. In this case, again, don’t worry too much about whether they’re coming out early or not. Your reaction should just be the same, which is assume that they’re staying in there full time. Turn on the music once they’re actually out, or turn on the pump again if you are able to run it, once you know for sure they’re out of the room. That’s it. Good, I hope that was satisfying.
If you have your own short or lengthy questions to send our way, cruise on over to floattanksolutions.com/podcast and I’ll be joined back in the studio in just a couple days with my co-host Ashkahn. Have that to look forward to. All right everyone, have a good one out there. Talk to you tomorrow.
Recent Podcast Episodes
pH testing devices for float tank solution – DSP 89
There are lots of things you can measure when testing the quality of your water, for sanitation and comfort. Many of which aren’t specifically designed for float tanks. This is kind of an open secret in the industry, but most things simply aren’t accurate because of the incredibly high salinity of float tank solution. And pH seems to be one of them. This can cause float center owners major headaches as it’s often one of the first things that health departments/regulators will want to measure when they come and inspect your place (if they do at all).
Graham and Ashkahn try to break down this mystery of float water and try to break down some theories as to why it might be that float tank water might not have accurate pH readings, regardless of how you measure it.
Handling humidity to reduce water drops on tank ceilings – DSP 88
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
The purpose of a flow meters and the flow rate for a float tank – DSP 87
When navigating demands from health departments, it can be an absolute minefield of regulation, oftentimes with holdovers from the pool and spa industries. Many of these can be superfluous to float centers, but if you’re just starting a center, it’s difficult to know which ones to ignore, and which ones to incorporate.
Flow meters fall into this weird gray area where they’re not as important for float centers as for pools (and in some cases aren’t really needed at all), but can still be required by health departments or regulators. And to not throw the baby out with the salty bathwater, there are definitely some very practical uses for flow meters on float tanks.
Graham and Ashkahn tackle all these confusing elements and even provide specific product recommendations for flow meters for float tanks. Give it a listen!
When to contact health department – DSP 86
Contacting your health department/inspector/regulator/enforcer/supreme overlord can be stressful, to say the least. And given their general lack of understanding of floating as an industry, it makes sense why float centers may put this off. However, they have the authority to shut down your business if they feel that it’s a public safety issue, and that’s a situation no one should put themselves in.
Talking to your health department early and often can save yourself some headaches, but you don’t want to go to them unprepared. There’s a lot of nuance to regulation and existing codes that you should probably be familiar with beforehand. Fortunately, it may be something other float centers in your area have had to deal with, if there are any.
Ashkahn and Graham have a few tips for what to do to prepare and how to address common concerns they may have in this episode.
Thoughts on facilitating couples floats – DSP 85
First off, we’ll just say that Float On does not offer couples floats and never has. Graham and Ashkahn dive into their reasoning for that decision while simultaneously addressing some of the common concerns and benefits that go along with the practice. Some people say it helps get people into the tanks that wouldn’t try it otherwise. Some smaller centers rely on the added revenue per tank and increased exposure to the practice. It’s a complicated question and one that each center will likely have to consider on their own.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
