Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello everybody. I am Graham, once again holding down the fort here alone in the studio. I guess not alone, Jordan is also here, but he’s just not in front of the mic, he’s behind the mic. He’s actually making some really animated faces right now. What’s that? You’re giving every listener $10? That’s really generous of you. Just go to floattanksolutions.com/jordanowesmemoney.
Getting back to the actual episode, boy is there a question today. It’s a really long one, and it takes a little explanation too, at the very beginning. So, it’s a long question with a footnote. Let’s just go ahead with it.
“Hi”, first of all. Hello. “What do you encourage your tacos and taco supremes to do when someone wakes and starts showering in a time of limbo?”
First of all, instead of managers and regular level employees, we call them taco supremes and tacos, is the background there. Time of limbo, I assume he means that time after you die but before you’re actually in your assigned afterlife. So, when you’re actually in this beyond living and death state, or just maybe a transition between floats. Not exactly sure.
“By that, I mean five to ten minutes before the scheduled time to start playing the music.” Okay, so I guess it was time between floats. “I understand that short floats can be good, and I’ve found that, especially for the first time, a 50 minute float can be the norm, as people’s minds start wondering about the wake up music. Thinking they are done with their floats, I wish to start their pumps so that the water can filter and thus start getting the room ready for the next client. However, my concern is that they are showering for excessive salt in the face or they just wanted to check their phone and intend on hopping back in until they hear the music. Just trying to find the balance for myself and recommendations for staff between being efficient in the workspace while not being totally invasive to the person and their session”
That was a big one. Basically, it’s just coming down to someone gets out of their float early, before the scheduled wake up music to come on to actually end their float, what do you do? Do you turn on the music early? Do you assume they’re getting out and run the pump so that you can actually get the next person in, maybe with a little more time? What is the right ethical and moral answer? I’m not too divided, and I’m the only one here so that’s really all that matters. I would say just don’t turn on the music initially. Turn it on at the scheduled time. Don’t turn on the pump early. If they come out of the room and they say yes, I’m totally done with my float, I’m not going back in that room, for sure turn on the pump or anything else, assuming that it doesn’t interfere with anyone who’s still in the tanks. At Float On this is another level to this problem. Even if people get out early at our shop and we know that they’re out of the room, our rooms are still right next to other rooms that usually have other people floating in them, so we can’t really turn on our pump equipment anyway, just because it would pass right into the tanks next door.
So, in our case it’s not a bonus even if we know that they have come out, but again, the customer is paying money to come in, or even if it’s a free float, it’s a free full length float, whatever that means for you, an hour or an hour and a half. So, if someone is out and showering, especially if it’s just 10 minutes beforehand and you think that they’re getting out anyway, don’t assume anything. It’s way better to, yourself, just have to rush a little bit more during transitions or again, get the next customer in on time as opposed to early. Way better to do that than to anger a customer by assuming that they’re done with the float. If you weren’t actually done with the float but the pump turns on while you’re in the shower, just getting salt out of your eyes, I’d feel a little bit rushed or almost that my calming experience was being pushed on a little bit excessively from the outside.
In things like this, I think, especially as a business owner, it’s important to really think of the needs of the customer ahead of just your own, or even the customer who’s coming in next. In this case, again, don’t worry too much about whether they’re coming out early or not. Your reaction should just be the same, which is assume that they’re staying in there full time. Turn on the music once they’re actually out, or turn on the pump again if you are able to run it, once you know for sure they’re out of the room. That’s it. Good, I hope that was satisfying.
If you have your own short or lengthy questions to send our way, cruise on over to floattanksolutions.com/podcast and I’ll be joined back in the studio in just a couple days with my co-host Ashkahn. Have that to look forward to. All right everyone, have a good one out there. Talk to you tomorrow.
Recent Podcast Episodes
Having a Laundry Service vs. DIY Laundry – DSP 69
Laundry is a fundamental necessity for float centers, the significance of which you can easily overlook. Some centers do laundry on-site, while others hire out a laundry service. On-site is almost definitely cheaper, but is it worth it? How much does it factor in to your bottom line to hire a laundry service, and what about the drawbacks of doing it on site? Not every float center can afford an industrial washer and dryer, can residential units handle a float center’s salt encrusted towels?
Graham and Ashkahn hit all these points and more while talking about their own personal experience doing both on-site laundry and hiring out a service and which one they definitively think is better and why/
Pros/Cons of Having a Post Float Lounge – DSP 68
Post float lounges are cool. Lots of float center owners use them to imbue their centers with their own personality, whether it be large sprawling rooms with comically large furniture, oxygen bars with artificial waterfalls, or just a place for you to hide mushroom sculptures for your customers to find. But these come at the cost of square footage for your center, which undoubtedly can cause problems. So, is it worth it? Ashkahn and Graham tackle the pros and cons, getting into the finer details of what it really means to have or not have these rooms in your center.
The typical Length of a Float Transition – DSP 67
A fundamental part of a float centers daily schedule is the transition between floats. It’s when the rooms get cleaned, the water runs through its filtration system, floaters need to shower, linens need changing out… So how long do you need to get all of this done? Naturally, the shorter it is, the more floats you can run in a day, but how close to the wire can you cut it?
Graham and Ashkahn lay out very clearly exactly why they do what they do at Float On for transitions and help illustrate some of the benefits and major hurdles they have had to overcome to get to this sweet spot in their scheduling.
How much to pay yourself as an owner – DSP 66
This is not an easy question for any business to answer, and it depends a lot on your own personal situation. Graham and Ashkahn lay down their thoughts on this difficult topic and provide insight into how they handle it at Float On.
When it’s time to fire an employee – DSP 65
Terminating an employee isn’t an easy thing to do. How do you know when to have that conversation? Obviously you don’t want to come off too strongly, but there also has to be a line somewhere. Graham and Ashkahn attempt to explain where the line is at for them and their personal philosophy on the subject.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
