Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello everybody. I am Graham, once again holding down the fort here alone in the studio. I guess not alone, Jordan is also here, but he’s just not in front of the mic, he’s behind the mic. He’s actually making some really animated faces right now. What’s that? You’re giving every listener $10? That’s really generous of you. Just go to floattanksolutions.com/jordanowesmemoney.
Getting back to the actual episode, boy is there a question today. It’s a really long one, and it takes a little explanation too, at the very beginning. So, it’s a long question with a footnote. Let’s just go ahead with it.
“Hi”, first of all. Hello. “What do you encourage your tacos and taco supremes to do when someone wakes and starts showering in a time of limbo?”
First of all, instead of managers and regular level employees, we call them taco supremes and tacos, is the background there. Time of limbo, I assume he means that time after you die but before you’re actually in your assigned afterlife. So, when you’re actually in this beyond living and death state, or just maybe a transition between floats. Not exactly sure.
“By that, I mean five to ten minutes before the scheduled time to start playing the music.” Okay, so I guess it was time between floats. “I understand that short floats can be good, and I’ve found that, especially for the first time, a 50 minute float can be the norm, as people’s minds start wondering about the wake up music. Thinking they are done with their floats, I wish to start their pumps so that the water can filter and thus start getting the room ready for the next client. However, my concern is that they are showering for excessive salt in the face or they just wanted to check their phone and intend on hopping back in until they hear the music. Just trying to find the balance for myself and recommendations for staff between being efficient in the workspace while not being totally invasive to the person and their session”
That was a big one. Basically, it’s just coming down to someone gets out of their float early, before the scheduled wake up music to come on to actually end their float, what do you do? Do you turn on the music early? Do you assume they’re getting out and run the pump so that you can actually get the next person in, maybe with a little more time? What is the right ethical and moral answer? I’m not too divided, and I’m the only one here so that’s really all that matters. I would say just don’t turn on the music initially. Turn it on at the scheduled time. Don’t turn on the pump early. If they come out of the room and they say yes, I’m totally done with my float, I’m not going back in that room, for sure turn on the pump or anything else, assuming that it doesn’t interfere with anyone who’s still in the tanks. At Float On this is another level to this problem. Even if people get out early at our shop and we know that they’re out of the room, our rooms are still right next to other rooms that usually have other people floating in them, so we can’t really turn on our pump equipment anyway, just because it would pass right into the tanks next door.
So, in our case it’s not a bonus even if we know that they have come out, but again, the customer is paying money to come in, or even if it’s a free float, it’s a free full length float, whatever that means for you, an hour or an hour and a half. So, if someone is out and showering, especially if it’s just 10 minutes beforehand and you think that they’re getting out anyway, don’t assume anything. It’s way better to, yourself, just have to rush a little bit more during transitions or again, get the next customer in on time as opposed to early. Way better to do that than to anger a customer by assuming that they’re done with the float. If you weren’t actually done with the float but the pump turns on while you’re in the shower, just getting salt out of your eyes, I’d feel a little bit rushed or almost that my calming experience was being pushed on a little bit excessively from the outside.
In things like this, I think, especially as a business owner, it’s important to really think of the needs of the customer ahead of just your own, or even the customer who’s coming in next. In this case, again, don’t worry too much about whether they’re coming out early or not. Your reaction should just be the same, which is assume that they’re staying in there full time. Turn on the music once they’re actually out, or turn on the pump again if you are able to run it, once you know for sure they’re out of the room. That’s it. Good, I hope that was satisfying.
If you have your own short or lengthy questions to send our way, cruise on over to floattanksolutions.com/podcast and I’ll be joined back in the studio in just a couple days with my co-host Ashkahn. Have that to look forward to. All right everyone, have a good one out there. Talk to you tomorrow.
Recent Podcast Episodes

Productivity software for your small business – DSP 24
You might not know this, but Graham and Ashkahn get almost as excited talking about productivity software and tips as they do float tanks.
From Boomerang and TextExpander to LastPass, Google Docs, and our very own Helm, there’s a ton of software out there to make your work much more streamlined and efficient. With TextExpander, for example, you can become a time wizard with pre loaded shortcuts to much longer or complicated copy, code, or even form-fills.
Listen above or read below for all the salty software trips we could fit into this episode.

Tips for soundproofing to avoid road noise – DSP 23
Soon after you open, you might realize that you’ve gotten a lot of the same complaint: The float was great, but I heard all this rumbling.
Odds are, your floaters are hearing one of two things — traffic on the road outside or their very hungry tummy.
If it’s the latter, feed them some post float snacks and tea. If the former, what can you do?
Aside from difficult and expensive projects, like building new walls or lobbying for the removal of cars from municipal streets, it turns out there are some pretty simple and cheap solutions that will block traffic noise.
Like inexpensive rubber pucks.
Pucks?
Puck yeah. Listen above or read below to learn more.

How to handle negative Yelp reviews – DSP 22
You’ve been open three months, things are going great, and then it happens — your first bad Yelp review.
Before you start throwing salt all over your center and gearing up to battle internet trolls, listen to this Daily Solutions Podcast where Graham & Ashkahn drop some wisdom on how to respond in the face of often-undue criticism.
It turns out the quickest way to address any negativity online is to reach out like a human, honestly and directly. Feedback can be helpful, and a constructive engagement with it can actually create quite a change in perception and experience from those giving it.

Concerns for running pumps with floaters in tanks – DSP 21
In today’s episode of the Daily Solutions Podcast, Graham & Ashkahn dole out some advice on why you shouldn’t run pumps when floaters are in your tanks.
The best case scenario if a pump goes on with someone still in it — their float is ruined. Worst case scenario? Their hair could get stuck in the filter or worse.
In our risk-averse society, these disaster scenarios compel us to set up safeguards to make sure they never happen. At Float On, we make it a point to never run a tank when a floater is still in it.
As they say, “Plan for the worst, hope for theta waves.”

Tips for a proper website setup – DSP 20
What does a float center need to do to get a website? What should they be prepared for? Find out in this episode of the Daily Solutions Podcast!
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.