Something in the world of floating have you stumped?
Show Highlights
Let’s say you buy a center and want to use H2O2 instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2 after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water?
Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, salutations.
Ashkahn: Okay-dokie. Welcome everybody.
Graham: Yeah, hi there.
Ashkahn: Warm those hands up cause-
Graham: Yeah, cause what?
Ashkahn: It’s here then you say-
Graham: Good set up there-
Ashkahn: Warm up-
Graham: It’s just like throwing the basketball out of bounds. Where were you on that one?
Ashkahn: Jeez I’m just the setup guy.
Graham: All right, today’s question is “hello”.
Ashkahn: Hello.
Graham: Hi.
Ashkahn: Hi.
Graham: “We have purchased an ongoing float center. The disinfectant-”
Ashkahn: Oh, nice. Yeah, so it matches with our other question from before. We should ask them, you know how they-
Graham: “We’ve purchased on ongoing float center. The disinfectant of choice the previous owners used is chlorine and UV which we continue to use. I would like to change to HP.”
Ashkahn: HP?
Graham: Hydrogen peroxide, I’m sure they mean. “Do I have to dump my current water to switch over to HP?”
Ashkahn: HP.
Graham: Thanks.
Ashkahn: What’s the name of that like steak sauce that they use in England? Is it HP sauce?
Graham: I think it’s HP.
Ashkahn: Okay, hopefully that’s not what they mean. Cause I would strongly advise them against that.
Graham: I mean, it’s probably anti-microbial.
Ashkahn: Yeah, it probably would make the solution denser. You know, I’m going to go ahead and chance my recommendation. You go ahead, use the HP sauce. Delicious, nutritious maybe.
Graham: All right, so you’ve got a bunch of chlorine in your water.
Ashkahn: Yeah.
Graham: You want that to instead be hydrogen peroxide.
Ashkahn: Yeah.
Graham: Well, I guess first make sure that, that’s legal and your health department is okay. You know there might be a reason they were using chlorine-
Ashkahn: Right.
Graham: Which could be health code or something that you’re required to actually use the setup they have. Double check that but then if you are able to switch over, I mean-
Ashkahn: Yeah. I mean, yes is probably the answer, that you can switch and you won’t have to drain the system. But like before we jump into the kind of details-
Graham: I’m ready.
Ashkahn: Or a little bit-
Graham: I want to jump.
Ashkahn: Don’t jump, hold on. Don’t jump.
Graham: Woo cannonball.
Ashkahn: You should consider something, which is that, let’s say you have a chlorine and UV system, which is what this person said in their question, right?
Graham: Yeah. That’s exactly what they said.
Ashkahn: In that scenario, typically chlorine would be viewed as kind of the primary disinfectant. That’s your kind of, biggest gun that you’re leaning on and you’re making sure is killing things. You know, if you have a chlorine UV system it might be that your UV is really light and not super hardcore. And that’s kind of okay cause the chlorine is killing stuff. If you switch to UV and hydrogen peroxide, the UV in that scenario becomes the thing that’s the main umphf in your system, right?
Graham: Yeah.
Ashkahn: So, you got to be careful. You’re like switching what the primary disinfectant is.
Graham: It’s a good point because the UV attached with the chlorine system might be super wimpy. You know and its just sort of there to add extra clarity and get rid of some of the disinfection byproducts that chlorine is generating. And it could totally not work as a primary disinfectant. So, yeah I mean, that’s definitely a great thing to make sure you’re double checking before you get into this.
Ashkahn: Yeah, like in your head you’re switching chlorine for UV and now that you’re switching to UV, you’re using hydrogen peroxide as an extra like oxidizer for it, is what you should be thinking in your head, as opposed to saying “I’m replacing chlorine with hydrogen peroxide.”
Graham: So, I mean let’s talk for just one second about how they check that. Like how do you look into whether or not your UV light might now be good enough to be the primary disinfectant?
Ashkahn: Great question. I would recommend listening to our episode about UV lights.
Graham: Yeah, I mean, yeah, listen to us some more is a great way to get educated. I totally agree. All right, so assuming those two things, assuming that you are cleared by the health department to actually do this switch and assuming that your UV light is good enough or that you’re just getting a new UV light, which is going to be good enough, now do you have to get rid of chlorine in the water?
Ashkahn: Okay.
Graham: Or can you get rid of chlorine in the water without dumping it?
Ashkahn: So, things around hydrogen peroxide get a little bit looser in the kind of general pool and spa field of knowledge. But, like I’m pretty sure hydrogen peroxide is used as a way of getting rid of chlorine. Like if you over chlorinate something or if you super chlorinate to deal with some sort of fecal incident or something like that, you know it’s one of the ways pools respond to contamination issues is by bumping the chlorine levels up. To get the chlorine levels back down, you can do a couple different things. One of them is using hydrogen peroxide. It just eats up the chlorine, they kind of destroy each other.
Like I would say you don’t have to drain your float tank. You know, there’s a lot of complicated chemistry that comes when you’re dealing with chemicals and stuff like that. It’s very likely that I can say something like this and someone else will be like “Oh, but don’t forget this one weird things happens and something.” But as far as I know and as far as I’ve heard and as far as I can tell from the fact that this seems to be something commonly done for this very purpose, you should be all right. You should just be able to put hydrogen peroxide in there.
The tricky thing is how are you going to measure that the chlorine is gone. Which you can’t, so you really just like because the chlorine destroys the hydrogen peroxide, you really just put peroxide in there until the peroxide levels are stable. And once they’re stable that means the chlorine is no longer there to be eating up the peroxide.
Graham: And my guess is, I mean you could probably just do this over the course of a day that you’re shut.
Ashkahn: Yeah.
Graham: I mean, you know, it’s not something specifically that we’ve played around with, with like getting the chlorine levels totally eradicated and getting hydrogen peroxide stabilized in that sense. Cause we’ve always been on hydrogen peroxide-
Ashkahn: Yeah.
Graham: Or at least we’ve never used chlorine.
Ashkahn: But if you wanted to be careful, I mean you can just like give it a couple days, air it out. Make sure there’s good ventilation, make sure you’re dealing with … you know if disinfection byproducts are being created or whatever’s happening in the process but I don’t know. Someone would have to, like, give me some pretty serious arguments that you would need to drain it.
Graham: Yeah and I will not try to be that person. But that said, I do want to toss something in favor of considering draining it, which is, and like this isn’t even on the chemistry level, it’s just, you just took over a float center that’s out there. Depending on when the last time their tanks are drained, I mean it might just make sense to keep the chlorine in there and just do a full water switchover-
Ashkahn: Yeah.
Graham: Rather than dealing with this right now. You know-
Ashkahn: Keep the chlorine-
Graham: I mean, for right now-
Ashkahn: Instead of trying to eradicate the chlorine-
Graham: Don’t try to switch disinfection systems right now. Switch to doing UV and then peroxide after they are going to already change out the water in the tanks.
Ashkahn: Or just, I mean one of the things about running a float center, is these float tank mysteries kind of happen in your float tanks. And if you have float solution from before you were ever around, it adds a lot of like question marks.
Graham: Was the water filtered when it originally went in the float tank?
Ashkahn: Yeah.
Graham: Did they ever use spa enzyme cleaner in the float tank water?
Ashkahn: Right.
Graham: Things like that you just don’t know. So there is something really nice now that it’s your center and you just took it over, kind of starting from scratch.
Ashkahn: For sure. I probably would do that, yeah.
Graham: See.
Ashkahn: If you’re taking over a place, yeah so outside of the chlorine issue, like just dumping it because you’re taking over a new business and you want to know, have your knowledge kind of be clear from the beginning. Yeah, for sure. I agree with that. Nice. Good turn around there.
Graham: Yeah, thanks.
Ashkahn: Okay.
Graham: Did you like how I started very gently-
Ashkahn: I was impressed-
Graham: Not trying to convince you.
Ashkahn: I was like “I’m not going to be convinced, all right?”
Graham: Gotcha! All right if you have other questions-
Ashkahn: But, hold on.
Graham: Oh, wait, you’re not done? I thought that was such a nice button. We finished, you know and the banner was about to drop. I’m like “Mission Accomplished.”
Ashkahn: No they should like if you’re in this situation, the other thing I wanted to say is, I’ve heard of people who are using chlorine and hydrogen peroxide as part of their routine. Like they are on their deep clean day adding some chlorine as kind of an extra like buffer to kill some stuff, while they are on a hydrogen peroxide system. So, for those of you out there, just make sure you understand this process that those things can kind of destroy each other and that it makes things hard to measure and all that sort of stuff. But, you know, theoretically if pretty much if we had better ways of measuring chlorine, you could do that. You could shock your system with chlorine once a week and while no ones in there and have it be during your deep clean day and have it kind of whatever, not be too worried about the disinfection byproducts. If you have good ventilation and you don’t have people in there and then kind of switch back to peroxide.
It’s a little strange of a system cause it’s a little strange to me to think that you think the rest of your system is not good enough to handle both. You shouldn’t be relying on once a week making sure you’re actually killing stuff, but you know, chlorine is more hardcore than hydrogen peroxide, that’s for sure.
Graham: Yeah and more generally documented.
Ashkahn: Yeah. So now you can go for it.
Graham: All right, if you have your own questions, head on down to floattanksolutions.com/podcast. Run don’t walk. We’ll be waiting.
Ashkahn: Yeah and you know put those hands in your pocket now, they are nice and warm.
Recent Podcast Episodes
Is there a “Best” Float Position? – DSP 224
Ashkahn and Graham thoroughly debunk the myth of a “best” float position. The Float On boys explicate their philosophy that there is no right way to float and instead talk about all the different positions they enjoy floating in. They learn more about each other than they expected to in the process.
What to Look for When Hiring a Float Center Employee – DSP 223
What makes a good float center employee? What does Float On look for when trying to find someone to take care of their salt monster tanks and their blissed out customers at the same time?
Ashkahn and Graham break down the qualities they look for when hiring, and what makes the people at Float On so special.
How Do you Incentivize Return Floaters without Memberships or Packages? – DSP 222
How many times has a float center owner had a first time floater come out of the tank and said something along the lines of “that was amazing! I need to do this every week!” and then they never see that person again? How do you get them to come back without committing to a membership or a high ticket package of floats?
Ashkahn and Graham share their thoughts on this exact problems and some of the creative solutions they’ve implemented at Float On to combat it. The key, for them, has been keeping it simple and making it accessible.
How to Schedule Your Float Center During the Slow Season – DSP 221
For most float centers, the summer months drastically change how busy it gets. It seems that zenning out to nothingness is moderately less appealing when there’s a lot of outdoor activities to enjoy.
Graham and Ashkahn share their thoughts on a reduced schedule. Float On runs 24 hours almost every day throughout the year. so reducing their schedule is typically against their philosophies. They explain some of the reasons people might consider it, what are some good ways to go about it, as well as explain some practices to consider avoiding when cutting hours.
Slip Proofing Your Float Tanks and Float Rooms – DSP 220
The solution inside float tanks is slippery. Really really slippery. What is the best way to make sure that float customers aren’t slipping and falling before or after their floats.
Ashkahn and Graham break down the various steps needed for slip proofing for inside the float tank, the first step out of the tank, the rest of the float room, your hallways, or inside your workrooms.
Latest Blog Posts
Float Quarterly – January 2016
It’s been our pleasure to be actively involved in the float industry for over five years now. In 2016, we’re already on track to have more new centers opening, more press covering floating, and more resources for people just entering our salty world than ever before.
With so much action, we’ve decided to send out brief, quarterly updates on our industry to keep people posted on the all the latest happenings. Welcome to our first installment!
Training to Become a Certified Pool/Spa Operator
Each year at the Float Conference, we put on a Certified Pool/Spa Operator (CPO) training course. At first, that might strike you as an odd thing to have as part of a float tank conference. This post will explain what CPO training is and why we think it can be a really useful certification to have on your belt.
Increase Sales by Offering Retail in Your Float Center
On their own, float tanks have a limit to their profits. Retailing has the potential to bring extra money into your shop, but it also requires a lot of work and attention on your part to really be successful at it. At Float On, our retail contributes 6.5% towards our overall sales and 3% of total profit. While this might not seem like a large contribution, depending on your sales, it could end up paying the wages of a whole extra employee.
The Health Department and Float Tanks… How to get Approved!
If you’re working on starting a float center, chances are you’re nervously anticipating having to call the health department. We’ve all heard horror stories of people being asked to follow pool rules that don’t make sense for them, or having to do costly changes to their pump systems.
float tanks not regulatedBelow is our best advice for working with your health department to get your float center approved, but before we dive into that, it’s important to get a bit of an understanding as to how the health department works.
