Something in the world of floating have you stumped?
Show Highlights
Let’s say you buy a center and want to use H2O2 instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2 after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water?
Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, salutations.
Ashkahn: Okay-dokie. Welcome everybody.
Graham: Yeah, hi there.
Ashkahn: Warm those hands up cause-
Graham: Yeah, cause what?
Ashkahn: It’s here then you say-
Graham: Good set up there-
Ashkahn: Warm up-
Graham: It’s just like throwing the basketball out of bounds. Where were you on that one?
Ashkahn: Jeez I’m just the setup guy.
Graham: All right, today’s question is “hello”.
Ashkahn: Hello.
Graham: Hi.
Ashkahn: Hi.
Graham: “We have purchased an ongoing float center. The disinfectant-”
Ashkahn: Oh, nice. Yeah, so it matches with our other question from before. We should ask them, you know how they-
Graham: “We’ve purchased on ongoing float center. The disinfectant of choice the previous owners used is chlorine and UV which we continue to use. I would like to change to HP.”
Ashkahn: HP?
Graham: Hydrogen peroxide, I’m sure they mean. “Do I have to dump my current water to switch over to HP?”
Ashkahn: HP.
Graham: Thanks.
Ashkahn: What’s the name of that like steak sauce that they use in England? Is it HP sauce?
Graham: I think it’s HP.
Ashkahn: Okay, hopefully that’s not what they mean. Cause I would strongly advise them against that.
Graham: I mean, it’s probably anti-microbial.
Ashkahn: Yeah, it probably would make the solution denser. You know, I’m going to go ahead and chance my recommendation. You go ahead, use the HP sauce. Delicious, nutritious maybe.
Graham: All right, so you’ve got a bunch of chlorine in your water.
Ashkahn: Yeah.
Graham: You want that to instead be hydrogen peroxide.
Ashkahn: Yeah.
Graham: Well, I guess first make sure that, that’s legal and your health department is okay. You know there might be a reason they were using chlorine-
Ashkahn: Right.
Graham: Which could be health code or something that you’re required to actually use the setup they have. Double check that but then if you are able to switch over, I mean-
Ashkahn: Yeah. I mean, yes is probably the answer, that you can switch and you won’t have to drain the system. But like before we jump into the kind of details-
Graham: I’m ready.
Ashkahn: Or a little bit-
Graham: I want to jump.
Ashkahn: Don’t jump, hold on. Don’t jump.
Graham: Woo cannonball.
Ashkahn: You should consider something, which is that, let’s say you have a chlorine and UV system, which is what this person said in their question, right?
Graham: Yeah. That’s exactly what they said.
Ashkahn: In that scenario, typically chlorine would be viewed as kind of the primary disinfectant. That’s your kind of, biggest gun that you’re leaning on and you’re making sure is killing things. You know, if you have a chlorine UV system it might be that your UV is really light and not super hardcore. And that’s kind of okay cause the chlorine is killing stuff. If you switch to UV and hydrogen peroxide, the UV in that scenario becomes the thing that’s the main umphf in your system, right?
Graham: Yeah.
Ashkahn: So, you got to be careful. You’re like switching what the primary disinfectant is.
Graham: It’s a good point because the UV attached with the chlorine system might be super wimpy. You know and its just sort of there to add extra clarity and get rid of some of the disinfection byproducts that chlorine is generating. And it could totally not work as a primary disinfectant. So, yeah I mean, that’s definitely a great thing to make sure you’re double checking before you get into this.
Ashkahn: Yeah, like in your head you’re switching chlorine for UV and now that you’re switching to UV, you’re using hydrogen peroxide as an extra like oxidizer for it, is what you should be thinking in your head, as opposed to saying “I’m replacing chlorine with hydrogen peroxide.”
Graham: So, I mean let’s talk for just one second about how they check that. Like how do you look into whether or not your UV light might now be good enough to be the primary disinfectant?
Ashkahn: Great question. I would recommend listening to our episode about UV lights.
Graham: Yeah, I mean, yeah, listen to us some more is a great way to get educated. I totally agree. All right, so assuming those two things, assuming that you are cleared by the health department to actually do this switch and assuming that your UV light is good enough or that you’re just getting a new UV light, which is going to be good enough, now do you have to get rid of chlorine in the water?
Ashkahn: Okay.
Graham: Or can you get rid of chlorine in the water without dumping it?
Ashkahn: So, things around hydrogen peroxide get a little bit looser in the kind of general pool and spa field of knowledge. But, like I’m pretty sure hydrogen peroxide is used as a way of getting rid of chlorine. Like if you over chlorinate something or if you super chlorinate to deal with some sort of fecal incident or something like that, you know it’s one of the ways pools respond to contamination issues is by bumping the chlorine levels up. To get the chlorine levels back down, you can do a couple different things. One of them is using hydrogen peroxide. It just eats up the chlorine, they kind of destroy each other.
Like I would say you don’t have to drain your float tank. You know, there’s a lot of complicated chemistry that comes when you’re dealing with chemicals and stuff like that. It’s very likely that I can say something like this and someone else will be like “Oh, but don’t forget this one weird things happens and something.” But as far as I know and as far as I’ve heard and as far as I can tell from the fact that this seems to be something commonly done for this very purpose, you should be all right. You should just be able to put hydrogen peroxide in there.
The tricky thing is how are you going to measure that the chlorine is gone. Which you can’t, so you really just like because the chlorine destroys the hydrogen peroxide, you really just put peroxide in there until the peroxide levels are stable. And once they’re stable that means the chlorine is no longer there to be eating up the peroxide.
Graham: And my guess is, I mean you could probably just do this over the course of a day that you’re shut.
Ashkahn: Yeah.
Graham: I mean, you know, it’s not something specifically that we’ve played around with, with like getting the chlorine levels totally eradicated and getting hydrogen peroxide stabilized in that sense. Cause we’ve always been on hydrogen peroxide-
Ashkahn: Yeah.
Graham: Or at least we’ve never used chlorine.
Ashkahn: But if you wanted to be careful, I mean you can just like give it a couple days, air it out. Make sure there’s good ventilation, make sure you’re dealing with … you know if disinfection byproducts are being created or whatever’s happening in the process but I don’t know. Someone would have to, like, give me some pretty serious arguments that you would need to drain it.
Graham: Yeah and I will not try to be that person. But that said, I do want to toss something in favor of considering draining it, which is, and like this isn’t even on the chemistry level, it’s just, you just took over a float center that’s out there. Depending on when the last time their tanks are drained, I mean it might just make sense to keep the chlorine in there and just do a full water switchover-
Ashkahn: Yeah.
Graham: Rather than dealing with this right now. You know-
Ashkahn: Keep the chlorine-
Graham: I mean, for right now-
Ashkahn: Instead of trying to eradicate the chlorine-
Graham: Don’t try to switch disinfection systems right now. Switch to doing UV and then peroxide after they are going to already change out the water in the tanks.
Ashkahn: Or just, I mean one of the things about running a float center, is these float tank mysteries kind of happen in your float tanks. And if you have float solution from before you were ever around, it adds a lot of like question marks.
Graham: Was the water filtered when it originally went in the float tank?
Ashkahn: Yeah.
Graham: Did they ever use spa enzyme cleaner in the float tank water?
Ashkahn: Right.
Graham: Things like that you just don’t know. So there is something really nice now that it’s your center and you just took it over, kind of starting from scratch.
Ashkahn: For sure. I probably would do that, yeah.
Graham: See.
Ashkahn: If you’re taking over a place, yeah so outside of the chlorine issue, like just dumping it because you’re taking over a new business and you want to know, have your knowledge kind of be clear from the beginning. Yeah, for sure. I agree with that. Nice. Good turn around there.
Graham: Yeah, thanks.
Ashkahn: Okay.
Graham: Did you like how I started very gently-
Ashkahn: I was impressed-
Graham: Not trying to convince you.
Ashkahn: I was like “I’m not going to be convinced, all right?”
Graham: Gotcha! All right if you have other questions-
Ashkahn: But, hold on.
Graham: Oh, wait, you’re not done? I thought that was such a nice button. We finished, you know and the banner was about to drop. I’m like “Mission Accomplished.”
Ashkahn: No they should like if you’re in this situation, the other thing I wanted to say is, I’ve heard of people who are using chlorine and hydrogen peroxide as part of their routine. Like they are on their deep clean day adding some chlorine as kind of an extra like buffer to kill some stuff, while they are on a hydrogen peroxide system. So, for those of you out there, just make sure you understand this process that those things can kind of destroy each other and that it makes things hard to measure and all that sort of stuff. But, you know, theoretically if pretty much if we had better ways of measuring chlorine, you could do that. You could shock your system with chlorine once a week and while no ones in there and have it be during your deep clean day and have it kind of whatever, not be too worried about the disinfection byproducts. If you have good ventilation and you don’t have people in there and then kind of switch back to peroxide.
It’s a little strange of a system cause it’s a little strange to me to think that you think the rest of your system is not good enough to handle both. You shouldn’t be relying on once a week making sure you’re actually killing stuff, but you know, chlorine is more hardcore than hydrogen peroxide, that’s for sure.
Graham: Yeah and more generally documented.
Ashkahn: Yeah. So now you can go for it.
Graham: All right, if you have your own questions, head on down to floattanksolutions.com/podcast. Run don’t walk. We’ll be waiting.
Ashkahn: Yeah and you know put those hands in your pocket now, they are nice and warm.
Recent Podcast Episodes
What to do if your Float Center Loses Power – DSP 184
What do you do with your float center if an emergency happens? What if your center loses power for several days and there’s nothing you can do about it? Float tanks rely on having a well regulated system to stay functional and we know that if it gets out of whack, everything can get pretty messy. So if you know this is happening, how do you prevent the worst of it?
Graham and Ashkahn work through this problem and come up with some solutions to prevent things like salt crystallization and upsetting your tank chemistry too much.
How to Handle Business Partner Disputes – DSP 183
It’s often said that having business partners is a lot like having a marriage, and just like a successful marriage, having a successful relationship with your business partner (or partners, we’re not here to judge) requires effective communication, patience, and compromise.
Float On has 5 owners, and they haven’t always agreed on the best course of action. So naturally disagreements happen, but how you handle them is the worthier part. Graham and Ashkahn share their experiences and what’s helped make Float On a success 7 years and counting.
Float Center Name Suggestions – DSP 182
There’s enough float centers out there now to have some established naming conventions for centers. It can feel like all the good names are already taken. Fortunately, Graham and Ashkahn have taken the time come up with a list of a few floaty sounding names that are so far not taken but totally awesome.
What Benefits of Floating have been Proven Scientifically? – DSP 181
Most float centers have to deal with the difficult problem of describing the benefits of floating to those who haven’t tried it yet or are just starting their float journeys. What is safe and accurate to say? Obviously, you don’t want to be advertising false claims if you can help it, but it can be difficult to find accurate information that tells a full story about floating.
Graham and Ashkahn dive into the resources available and clear up some of the confusion surrounding our salty practice. Check out the show notes for a list of great resources!
How Best to Heat Your Float Tank – DSP 180
In this episode, Graham and Ashkahn break down the pros and cons (not Kahns) of different types of heating typically used in float tanks. Aside from going over the most common types of heating, they also provide tips and tricks for keeping your tanks warm that don’t have to do with water temperature and making sure you’re providing a comfortable experience for your customers.
Latest Blog Posts
How to Reduce Ground Vibrations for Float Tanks
While sound and light proofing are the most salient examples of sensory deprivation involved with float tanks, we receive questions regarding the elimination of low-rumbling noises caused by vibrations from the surrounding environment. Since it’s important that float...
Presenting the 2014 State of the Float Industry
A Word on Our Data Where it Comes from & What it all Means Just before the 2014 Float Conference, we sent out two questionnaires to members of the float community. One targeting existing centers to see how they got started, what they’re doing now, and what...
How to Run Useful Tests With Your Construction
“Negative results are just what I want. They’re just as valuable to me as positive results. I can never find the thing that does the job best until I find the ones that don’t.” ― Thomas A. Edison Test Early, Test Often There are few things as terrifying as spending a...
Before Your Float Center has a Location, Get Online
So… You want to start a float center? One of the first thing people do is they begin researching. They scour the internet for float tank information in preparation for holding educated conversations with future customers. After all, you will be seen as the expert, so...
