Something in the world of floating have you stumped?
Show Highlights
Graham goes solo today while awaiting Ashkahn’s return.
Graham takes a question about cement backer board and the reasons it should be avoided in a float room. It’s a dense episode. Real dense. More dense, in fact, than cement backer board.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right, hello, everybody. My name is Graham, and that’s it, my name’s Graham. There’s no one else in the studio here with me today. Ashkahn’s gonna be back very shortly, and we’ll have the old Grashkamn duo.
But, for now, I’m just gonna launch right into answering today’s question, which is: “You mentioned not to use cement board when using tiles on the wall. What is the reason for that?”
There’s a couple good reasons, besides just we said so. They are related to soundproofing, and then salt, I guess, like so much else in the float world. The salt aspect, I guess we’ll talk about first because that’s more core to what cement backerboard is.
Basically, just in case you’re not familiar with it, it’s a different kind of material that you’re putting behind typical tile wall. It’s kind of porous, but still very dense, kind of inflexible type material. Typically, you’d put this directly on the studs rather than putting on drywall or something on top of them.
The kind of classic application is that the tile going on top is itself kind of permeable, especially the grout. For instance, in a shower area, you expect a certain amount of the water to kind of seep into the grout, and perhaps get into whatever’s behind it. If that’s regular drywall, then you risk it getting that wet, and molding out, and stuff like that. You want this kind of material back there that’s more solid, that’s not going to mold, but that’s also semipermeable so when the water gets in there, it’s allowed to evaporate over time, which is kind of the idea.
With our application, we’re using porcelain tile with epoxy grout, so we’re not really expecting water to get back there. The main protection from the walls is actually just that impermeable surface of the tile and the epoxy grout.
The other thing is, if water did get back in there, and if you weren’t using kind of a permeable solution with the cement backerboard, salt would also theoretically be able to get back there. That’s terrible because while water is able to evaporate, saltwater will get into something, and when it dries, the salt crystals will expand, and that thing will just start to get destroyed, which is where so much of the salt damage that we see in our space comes from. That’s kind of just on the salt-proofing side, why you don’t really see that cement backerboard.
The main reason why you see the alternative, which is some kind of either adapted drywall setup, usually MMR, mold and mildew resistant, maybe multilayered for soundproofing, or specifically soundproof drywall, something like QuietRock, also maybe MMR, mold and mildew resistant. The idea with that is in addition to trying to make these wet rooms, which is usually where cement board is going, you’re now trying to soundproof those, and turn them into the equivalent of a sound studio almost. Cement backerboard is not going to provide you the same kind of soundproofing as a really heavy drywall set up, or especially something like QuietRock.
Since you want that soundproofing, is also one of the reasons that we go with a totally impermeable surface on the outside. Other than saltwater, you just wanna make sure that now that you’ve put up this heavy soundproof drywall, you’re protecting it. So kind of for both of those reasons, and they mix together a lot, but that’s typically why you’re not seeing cement backerboard in a float center type application. Instead, what you will see, if you are using tile, is this heavy layer of soundproof drywall, again, whatever, whether it’s custom made or just multilayers of drywall with something like green glue in between. Then you’ll see the porcelain tile on top of that.
All right, that wasn’t so bad. I think that the Graham only show can hold its own, maybe we’ll just kick Ashkahn off for the foreseeable future, you know, just kind of wing it on my own.
If you do not wanna see that, let me know by going to floattanksolutions.com/podcast and I will talk to you tomorrow. Thanks, everyone.
Recent Podcast Episodes
How do you Handle Changing Memberships? – DSP 274
This year at the Float Conference, Derek hosted a marketing forum and took questions that he wanted to share with everyone here.
This episode focuses on how Float On handles memberships, including tiered memberships and how to gracefully transition from one type of membership to another.
Are Vapor Barriers a Good Idea for Float Centers? – DSP 273
You can tell when Graham starts to miss Ashkahn when he makes a soundboard made up of sound clips from previous episodes just to have Ashkahn do another intro.
Jake and Graham break down barriers in this episode. Vapor barriers, that is. These tools are a little confusing in the construction world and their efficacy is hotly debated in just regular construction, never mind the demands that a float center has, especially in regards to moisture protection. Fortunately, Graham and Jake know a thing or two about a thing or two and explain what vapor barriers are, how they work, and what the source of contention is.
What to Consider with Plumbing in a New Float Center – DSP 272
Graham and Jake talk about the confusing world of plumbing for your float center. There are any number of unpleasant surprises that can come about when planning the water lines to showers, getting floor drains in place, and making sure everything lines up how it’s supposed to. If the sewer main is too deep or not where you think it is, it can add a significant amount of cost to your build out just to get floor drains installed. Fortunately, the guys have some useful tricks to help mitigate costs and plan accordingly.
Should I use Spray-in Insulation for my Float Center? – DSP 271
Graham and Jake are still in a sans Ashkahn world at Daily Solutions, but they’re not letting it harsh their mellow.
The guys are talking about the different types of spray-in insulation today. It’s a pretty common material in construction and it can be a fantastic insulator for float centers, if you get the right type.
Jake and Graham go over the differences between open cell and closed cell insulation and why, specifically, float centers should avoid open cell insulation. They also provide some excellent pointers on the materials themselves and good conversations to have with a contractor regarding insulation.
Are Tankless Water Heaters the Best? – DSP 270
Graham and Jake take on talking about Tankless or “On Demand” water heaters today. They break down a lot of the benefits of them compared to storage water heaters like the fact that they provide a nearly limitless source of hot water, require less energy consumption, etc. They’re not perfect though, and any float center considering one should look closely on how best to implement them. Jake shares some of the pitfalls of them as well as how to maximize their usefulness.
Latest Blog Posts
Oh, the Questions You’ll Hear!
When you run a float tank center, you’re going to get asked a lot of questions. Do I float naked? Can I drown? Is this sanitary? Many of these are easy to answer: It’s recommended. Not without a conscious, and determined effort. Yes! There are some questions, however,...
Happy TANKSgiving (Giving Gifts to Monthly Members)
Monthly memberships are an important way to ensure that your float tank center has a consistent, if not dependable, amount of business.
While pricing structures for memberships vary widely across the industry, we’re focusing less on the strategy of what to charge and looking more at the benefits we’re actually offering. Once we’ve established a solid offering, then we can revisit pricing.
Running a successful monthly membership program takes more than just charging customers and making sure they use their credits. With a little creativity, we can find ways to increase engagement.
Your Flow Meter May Be Inaccurate (and what to do about it)
Float tanks tend to use a lot of parts borrowed from the pool and spa industry and, whenever that happens, it’s always important to question whether that pool part works accurately with our salt water solution. We’ve recently gained some insight into that question on...
The Float Tour Blog Roundup!
The following is our collection of links to the all of the Float Tour blogs. My chronicling of our adventure, highlighting all of you out there.
Thank you for the memories.
