Something in the world of floating have you stumped?
Show Highlights
In this short, salty, and to the point episode, Graham and Ashkahn talk about installing float tanks on the second floor and how to work with contractors and engineers to determine if you need to reinforce your building to support the weight.
While you usually don’t need reinforcement, it’s always good to check. Listen in above or check out the transcript below and, as always, be sure to send us your questions. All questions welcome, from basic industry questions to well crafted stumpers. If Graham and Ashkahn don’t know the answer, they still relish the journey of discovery and educated guessing.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: We’ve got a question today about being on the second floor of a building with your float center. So, if you’re thinking about putting a float center on the second floor, do you need to do any structural reinforcement to hold the weight of the float tank?
Graham: Let me just say definitively that, it totally depends.
Ashkahn: Yeah, that I think is a very concrete answer.
Graham: Of course, it’s going to depend on the building, how new your construction is, whether you’re in a big multi-story concrete kind of building or whether you’re in an old wooden Victorian house. There’s a lot that goes into it, but shockingly, the overall answer in almost all of those cases tends to be no. You don’t really need to do any extra reinforcement.
Ashkahn: Yeah, most times people bring in a structural engineer to take a look at things and examine it. Often landlords will even require you to do that.
Graham: Which you totally should do, don’t just listen to us and be like, “Oh it’s totally fine,” and go forward with it — a structural engineer is a great thing to bring in.
Ashkahn: It usually ends up being that while the float tank is heavy and all the salt water is heavy and all that, it’s just got such a big footprint. The float tanks are so big that the actual amount of pounds per square foot that’s really being put on, is not really as much as one might think. So it tends to be that a lot of buildings can hold it, even the way they are. Especially newer construction, like newer condo type buildings with strong reinforced concrete and stuff like that, tend to not really be much of a concern.
Graham: Again, surprisingly even for older buildings. Often times those are also good to go. Another good reason to consult an expert before spending a lot of money on reinforcements you might not necessarily need.
Ashkahn: Yeah, it’s always weird and there’s always weird stuff out there. I mean, even The Float Shoppe across the river from us, they’re in an old Victorian house and they brought a structural engineer in to check things out before they started and they found they could put float tanks on the second floor but their first floor was not actually strong enough to put float tanks on. Which is really crazy.
Graham: Yeah, so again, consult the experts and if it doesn’t work out, then you always can reinforce anyway.
Ashkahn: Boom.
Graham: Shakalaka.
Recent Podcast Episodes
Handling Common Client Concerns: Claustrophobia – DSP 80
This is something pretty much every float center deals with on a regular basis. The first objection that a lot of people will say when they first hear about floating is “Oh, I’m too claustrophobic for that”. Which… feels like getting shut down straight out of the gate.
Graham and Ashkahn, as seasoned float center owners, have heard this all too often and are not only familiar with it, but have some excellent ideas as to why this is the first major objection people throw out there as well as good ways to combat this concern.
Pros/Cons of having Business Partners – DSP 79
Graham and Ashkahn talk from their (admittedly very biased) perspectives on the merits and flaws of getting involved with a business partner for a float center. Most of the things they talk about are just universal truths for starting any startup. Realistically, it’s going to have a major impact on your workload, your decision making, your investments, and even your free time.
It’s worked out well for these two, but the reality is that sometimes having a business partner is a lot like being married. How do you find the right person? How do you handle disagreements? It can be one of the most daunting, and rewarding decisions to make when starting up.
A list of our favorite podcasts – DSP 78
Sure, this is a great podcast, but it’s over after ten minutes in the day. What other podcasts are out there for you to get your fix once the high of listening to Graham and Ashkahn wears off? Fortunately, Graham and Ashkahn have solved this problem too!
So this episode is all about other podcasts. This one isn’t the only one in the industry, and there’s tons of other podcasts that are great for any startup, so they talk about some of their favorites as well. Graham also throws out some philosophy podcasts for those who want to flex their mental muscles too.
Check out the resources on this episode for some great suggestions!
How much Epsom salt do you keep on hand? – DSP 77
Obviously float centers need a lot of salt. The average float tank requires roughly a thousand pounds of salt to maintain a specific gravity high enough to be functional. What about after you get your tanks filled and ready to go, how much do you need to have on hand just for maintaining that level? Fortunately, Graham and Ashkahn have a good rule of thumb for how they run Float On to use as a metric, as well as some good simple tips to keep in mind about storage in your float centers.
Where to cut corners in opening a float tank center – DSP 76
Opening a float center is a huge expense. There are several major investments that can seem daunting being on the outside looking in. Where to you skimp? The float tanks themselves are definitely a huge part of that, but getting everything right for construction seems even more daunting possibly. It’s a natural inclination to save money and it can definitely seem like there has to be a corner to cut somewhere to bring that bottom line down a little bit more. You want to do it correctly though, it doesn’t really seem worth it if it’s going to end up costing you more money down the line to fix or replace whatever it is you have now.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
